Octave V80SE Line
Liên hệ
The all-new OCTAVE V 80 SE sets new benchmarks for quality and performance in the product category of integrated amplifiers. He is the crown of the Octave integrated amplifier range and shines with a completely new amplifier design. A new driver stage, upgraded output transformers, and a more sophisticated power transformer highlight the technical design, while a completely new feedback loop offers absolute stability. As a serious alternative to high end separate pre- and power-amplifier components, the V 80 SE is equipped with a wide variety of inputs, both RCA and XLR, and features full function preamp capabilities. A MM or MC phono board is optional. A connection for Octave’s proprietary Black Box or Super Black Box power supply capacitance upgrade module is also included.
—————————————
còn 1 hàng
- Mô tả
- Đánh giá (0)
Mô tả
Power Output |
2 x 120 W continuous, 150 W Peak into 4 Ohm
|
|||
Frequency Response |
2 Hz – 80 kHz
|
|||
Total Harmonic Distortion |
< 0,1% @ 10 W into 4 Ohm
|
|||
Signal-to-Noise Ratio |
> 100 dB
|
|||
Minimum Speaker Impedance |
2 Ohm
|
|||
Connections | Inputs: 5 x Line Level RCA, 1 x Phono optional
1 x XLR Input Outputs:1 x Rec Pre-Out and Main-In, Master In and Master Out |
|||
Features |
ECO Mode, Bias Adjustment, Power Management |
|||
Preamplifier | ||||
Input Sensitivity | 300 mV RCA + XLR | |||
Input Impedance | 40 kOhm RCA; 25 kOhm XLR | |||
Channel Balance | 0,5 dB bis – 70 dB from Volumeadjuster | |||
Left/Right Crosstalk | 60 dB | |||
Input to Input Crosstalk | – 105 dB | |||
Gain Pre-Out | + 6 dB | |||
Phono | ||||
Input Impedance | MC 500 Ohm, MM 47 kOhm | |||
Signal-to-Noise Ratio | MC 75 dB, MM 90 dB | |||
Input Sensitivity | MC 0.5 mV, MM 4 mV | |||
Subsonic Filter |
-12dB/ Oct. 20Hz corner frequency
|
Power Consumption |
< 30 W Ecomode, 180 W idle, 500 W at full power
|
|||
Weight | 23 kg | |||
Standard Accessory | Power cord, 3 mm screwdriver, IR-Remote Control, Allen key for removing the cover | |||
Main Fuse | 230/240 V Mains:: 3,15 A slow-blow type H |
Đánh giá
Chưa có đánh giá nào. Thêm đánh giá