Ampli công suất Cary Audio SA-200.2
4,039 ₫
The SA-200.2 is a two channel power amplifier rated at 200 watts per channel into an 8 ohm load and 350 watts per channel into a 4 ohm load. The rear panel has XLR and RCA inputs and a remote turn on trigger. Quiet, low distortion operation with unmatched reliability.
- Mô tả
- Đánh giá (0)
Mô tả
Mô tả sản phẩm
The following section describes the SA-200.2 basic specifications. The specifications are subject to change without notice or obligation.
| Circuit Type | Solid State, Class A/B |
| Power Output | 2 x 200 watts @ 8 Ohms from 20Hz to 20KHz 2 x 350 watts @ 4 Ohms from 20Hz to 20KHz |
| Frequency Response | 10Hz – 50KHz +/- 0.1 dB |
| Signal-to-Noise Ratio | >100dB, “A” Weighted |
| Input Impedance | 22K Ohms RCA-unbalanced 22K Ohms – Balanced (XLR) |
| Voltage Gain | 28 dB |
| AC Power Requirements | 117/234 Volts AC @ 50/60 Hz |
| Break-In Time | 100 hours of playing time |
| Audio Input | 2 RCA, 2 XLR |
| Audio Output | 2 pairs of heavy-duty, gold-plated binding posts |
| THD | Less than 0.05% at rated output |
| Damping Factor | Greater than 400 from 10Hz to 400Hz |
| Remote Trigger | 3.3-24v DC at 5mA or greater |
| Finish | Black epoxy coated steel chassis Silver anodized aluminum faceplate (black optional) |
| Weight | 65 lbs |
| Dimensions | 7.75” H x 17.7”W x 19.5 ”D |











Đánh giá
Chưa có đánh giá nào. Thêm đánh giá