Xem giỏ hàng “Loa Gauder Akustik Vescova – MK2” đã được thêm vào giỏ hàng.
  • 4,500 

    Loa Gauder Akustik FRC – MK2

    4,500 

    The FRC (Front-, Rear-, Centerspeaker) uses the same drivers and frequency crossover as the Vescova just put in a smaller enclosure. Therefore it is the ideal supplement to the Vescova, Cassiano and Arabba for extend your stereo to a multi-channel system. In combination with our active subwoofer Stonehenge it can also be used as an excellent frontspeaker. You can imagine the sound efforts we made remembering that also the FRC is a 21 /2 construction which as a centerspeaker avoids a sound cancellation for people not sitting in the middle.

  • 10,500 

    Loa Gauder Akustik Vescova – MK2

    10,500 

    Là đôi loa cây sử dụng hoàn toàn các củ loa màng gốm. Vescova MK II là đôi loa sở hữu vẻ bề ngoài sang trọng và âm thanh ổn định. Dòng loa này có bass sâu, độ chi tiết cao, trong trẻo, đặc biệt là vô cùng chính xác, trung thực. Chỉ với 1-2 tuần sở hữu đôi loa này, cùng với sự đầu tư khai thác kỹ hơn một chút. Bạn sẽ thấy được rằng âm thanh của những đôi loa cũ mình dùng trước đây vừa thừa nhiều lại vừa thiếu nhiều. Với Vescova MK II, đôi tai của bạn sẽ phát triển lên một tầm cao mới thực sự khó tính hơn trước đây rất nhiều. Với Vescova, bạn có thể tự nâng cấp chất lượng âm thanh của đôi loa bằng cách thay thế củ loa treble gốm bằng một củ loa cao cấp hơn chính là củ loa kim cương. Khi đó, giải tần cao của bạn có thể đạt tới 80 khz. Ngoài 3 màu chính là gỗ tự nhiên, sơn mài đen piano, sơn mài trắng piano bạn có thể có nhiều sự lựa chọn hơn với 9 màu gỗ khác. (Với điều kiện bạn phải đặt hàng những màu thêm này).
    ***
    The Vescova is a 2,5 way speaker. The lower woofer is only applied for working in the lowest frequency region – only up to 130 Hz. This woofer is backed by a vented enclosure with the port facing down to the ground thus increasing efficiency. We choose the deep cut-off frequency to prevent this woofer from radiating into the frequency region of human voices. The second, upper woofer faces a sealed enclosure on its back and goes up to 3200 Hz where the tweeter is taking over the sound radiation. As this woofer is emitting the most important frequency region – the mids – we choose a sealed enclosure as vented enclosures always colorate the sound due to cabinet and vent resonances. In contradiction a vented enclosure goes down deeper and the air of the vent is supporting the woofer for the deepest bass.